7
Hardware
:
ITEMS NEEDED TO COMPLETE
•
50 CC Gas engine and ignition
•
Pitts style muffler or header with canister
muffler or tuned pipe
•
Engine mounting bolts, lock nuts, and washers.
•
3 1/2” Spinner and propeller of choice
•
2 x aileron servos (min 180 in./oz. Torque,
Digital, Metal geared)
•
1 x rudder servo (min 180 in./oz. Torque,
Digital, Metal geared)
•
2 x elevator servos (min 180 in./oz. Torque,
Digital, Metal geared)
•
1 x throttle servo (Fast / Reliable)
•
1 x choke servo (Fast / Reliable)
optional
•
Servo extensions 2 x 6,” 3 x 12,” 2 x 18” 2 x 36”
•
1 x 8 channel receiver ( PCM recommended)
•
1 x receiver battery (min 6.0 volt / 1700ma)
•
1 x ignition battery (min 4.8 volt / 1700ma)
•
2 x switches with charge jacks
Tools
:
•
Allen wrenches US and Metric.
•
Dremel cutting disc and sanding drum tool
•
Electric drill and selection of bits
•
Razor saw
•
Flat head screwdriver
•
Hobby heat gun
•
Hobby iron and covering sock
•
Masking tape
•
Modeling knife
•
Needle nose pliers or crimping tool
•
Paper towels
•
Pen, pencil or felt tipped marker
•
Phillips screwdriver
•
Rubbing alcohol
•
Ruler and tape measure
•
Scissors
•
T pins
•
Waxed paper
•
Wire Cutters
Adhesives
:
•
15-30 Minute epoxy
•
Blue Loctite
•
Epoxy mixing cups, mixing sticks, brushes
•
CA kicker (optional)
•
Thick, Thin and Medium CA
•
Rubbing alcohol
•
Wipes
WARNING
Some rubbing alcohols
may attack painted parts.
