56
3.
It is recommended to remove the top engine
mounting hardware from the same side as your
throttle arm. This will make attaching the ball
link to your throttle arm much easier.
4.
Temporally Attach the ball link to the throttle
pushrod and secure to the carburetor throttle arm
with a 4-40 bolt and nylon lock nut.
Note
: Do not Loctite at this step
5.
Dry fit the servo tray to the fuselage. The
throttle servo is mounted on the side of the
fuse that aligns with the engine carburetor
throttle arm. Use the throttle pushrod to help
line up proper mounting position
Note:
If properly lined up with hole in engine
box cover will allow easy access to servo arm
and servo mounting screws
6.
Drill throttle servo mounting holes and install
throttle servo to mounting tray.
