10
1.
In order to complete this step you will need:
Clear covering, Covering Iron, Scissors,
Rubbing Alcohol, and Paper towel.
Applying clear covering to the leading edge of wings and stabs.
2.
Clean the leading edge of each wing thoroughly
with rubbing alcohol in order to insure a clean
surface for the covering to stick to.
Note:
Wing pictured in the following steps may
be a different color and model. However, the
procedure for applying the clear covering to
your model will be the same.
3. Seal the top and bottom of the leading edge
carefully to insure the covering is securely
attached to the wood underneath.
4. Lay out one of the pieces of covering next to the
leading edge of the wing in order to find the
correct length for it to be cut to.
