SKeeper™ - User Manual
Page 21
3. The user can cancel the process at any time by pressing
the ON/OFF button.
4. Wait for the other party to answer the phone call.
5. When the call is answered, the ring tone will stop.
Listen to the other party and speak into the microphone.
M
AKING A
S
AFETY
C
ALL
W
HEN THE
SK
EEPER IS
OFF
You can initiate a Safety Call even when the SKeeper is turned
off, by following these steps:
1. Press and hold the Safety Call button for at least 1 second,
until a beep is sounded.
2. SKeeper turns on and the green LED flashes every
second.
3. After about 20-30 seconds, the SKeeper connects to the
network and the green LED flashes every 5 seconds
indicating normal standby operation.
4. SKeeper sounds a ring tone and the green and orange
LEDs flash intermittently every second.
