SKeeper™ - User Manual
Page 20
When pressing any dialing button.
At the end of a conversation.
After sending a text message (SMS).
When plugging the charger in or out.
When the device is being remotely updated.
M
AKING A
S
AFETY
C
ALL
Follow these steps to initiate a Safety Call:
1. Press and hold the Safety Call button until a beep is
sounded. SKeeper sounds a ring tone and the green and
orange LEDs flash intermittently every second.
2. SKeeper
calls the first preset safety number. If there is no
answer, SKeeper tries to call the next stored number (up to
4) in sequence until there is an answer.
