SKeeper™ - User Manual
Page 14
C
ONNECTING THE
SK
EEPER
A
CCESSORIES
The SKeeper comes with a choice of two straps for wearing the
device: a wrist strap, or a lanyard (neck strap).
W
RIST
S
TRAP
Wear the SKeeper on your right or left wrist at your
convenience (the same way that you wear a wrist watch).
To replace or remove the wrist strap from SKeeper, proceed as
follows:
1. Position the SKeeper on its front panel with the rear panel
facing towards you.
2. Use a tool (e.g. tweezers) to hold the spring on one of its
sides and press it toward the other side so that the spring
exits the hole.
3. Bend the wrist strap and free one side of the spring. Then
free the other side of the spring from the strap.
Take care during this step not to lose the spring.
4. Repeat the same steps for the other wrist strap.
To install the strap again, simply repeat the actions in reverse
order.
