Installation and Configuration
Nmark SSaM Hardware Manual
2.5. XY2-100 Interface (J104)
The XY2-100 Interface connector (a 25-pin, D-style connector) has outputs for galvo clock, sync, and
channel connections. The connector pinout is shown below. J104 is designed for a 1-to-1 connection to a
galvo supporting the XY2-100 interface. The use of shielded cabling is recommended.
Table 2-13:
XY2-100 Interface Connector Pinout (J104)
Pin
Description
In/Out/Bi
Pin Location
1
Clock -
Output
2
Sync Signal
Output
3
Channel 1 -
Output
4
Channel 2 -
Output
5
Channel 3 -
Output
6
Status -
Input
7
No Connection
N/A
8
No Connection
N/A
9
No Connection
N/A
10
No Connection
N/A
11
No Connection
N/A
12
No Connection
N/A
13
No Connection
N/A
14
Clock +
Output
15
Sync Signal
Output
16
Channel 1 +
Output
17
Channel 2 +
Output
18
Channel 3 +
Output
19
Input
20
No Connection
N/A
21
No Connection
N/A
22
No Connection
N/A
23
No Connection
N/A
24
No Connection
N/A
25
No Connection
N/A
NOTE
: Many scanner suppliers use the "no connection" pins on the XY2-100 cable to supply power to the scanner. Please consult
the hardware manual of the scanner connected to the NMARK-SSAM to determine which pins are used to supply power and modify
the interconnect cable accordingly
Table 2-14:
Mating Connector Part Numbers for the XY2-100 Interface Connector (J104)
Mating Connector
Aerotech P/N
Third Party P/N
25-Pin D-Connector
ECK00101
FCI DB25P064TXLF
Backshell
ECK00656
Amphenol 17E-1726-2
30
Chapter 2
www.aerotech.com
