Aerotech Nmark SSaM, Manual

Page: 40 / 58

Installation and Configuration Nmark SSaM Hardware Manual
2.9. Digital I/O Connector Interface (TB107 A/B)
The digital I/O connector provides eight non-isolated inputs and two non-isolated outputs. The inputs are
filtered and connected to a 74LCX16244 (
Figure 2-16 ). The two outputs are driven by 74AHCT1G14 inverters
( Figure 2-17 ).
Table 2-26: Digital Input Specifications (TB107)
Specification Value
Input Voltage +5 VDC
Table 2-27: Digital Output Specifications (TB107)
Specification Value
Output Voltage +5 VDC
Output Current 24 mA
Table 2-28: Digital I/O Pinout (TB107 A)
Pin Label Description In/Out/Bi
1 +5V +5V Output Power Output
2 Ground N/A
3 DI14 Digital Input 14 Input
4 DI12 Digital Input 12 Input
5 DI10 Digital Input 10 Input
6 DI8 Digital Input 8 Input
7 N/C No Connection N/A
8 DO8 Digital Output 8 Output
Table 2-29: Digital I/O Pinout (TB107 B)
Pin Label Description In/Out/Bi
1 +5V +5V Output Power Output
2 Ground N/A
3 DI15 Digital Input 15 Input
4 DI13 Digital Input 13 Input
5 DI11 Digital Input 11 Input
6 DI9 Digital Input 9 Input
7 N/C No Connection N/A
8 DO9 Digital Output 9 Output
Table 2-30: Mating Connector Part Numbers for the Digital I/O Connector (TB107 A/B)
Mating Connector Aerotech P/N Phoenix P/N
Wire Size: mm
2
[AWG]
8-Pin Terminal Block ECK01386 1881383 0.5 - 0.080 [20-28]
40 Chapter 2 www.aerotech.com