Electrical Specifications and Installation
MPS75SLE Hardware Manual
3.1. Motor and Feedback Connectors
The MPS75SLE comes from the factory completely wired and assembled. Each MPS75SLE is shipped with
documentation regarding the wiring, controller interface connectors, and specifications.
N O T E :
Refer to the other documentation accompanying your Aerotech equipment. Call your Aerotech
representative if there are any questions on system configuration.
The MPS75SLE's protective ground connection provides motor frame ground protection only. Additional
grounding and safety safeguards are required for applications requiring access to the stage while it is
energized. The System Integrator or qualified installer is responsible for determining and meeting all safety
and compliance requirements necessary for the integration of this stage into the final application.
D A N G E R :
Remove power before connecting or disconnecting electrical components or
cables. Failure to do so may cause electric shock.
W A R N I N G :
The protective ground connection must be properly installed to minimize the
possibility of electric shock.
W A R N I N G : Operator access to the base and table top must be restricted while connected to
a power source. Failure to do so may cause electric shock.
C A U T I O N : The stage controller must provide over-current and over-speed protection. Failure
to do so may result in permanent damage to the motor and stage components.
16
Chapter 3
www.aerotech.com
