MPS75SLE Hardware Manual
Mechanical Specifications and Installation
2.3.1. For XY Assemblies and Special Cases
To access the inner mounting holes, the stage table must be moved. The following is the procedure for
moving the table and mounting the stage (see
Figure 2-6
).
N O T E :
If the stage is not connected to a power source, it should be possible to move the stage table by
hand with steady even pressure. Do not attempt to manually move the stage if it is connected to a power
source or includes an integrated brake.
1. Manually move the stage to one end of travel, revealing two of the hidden mounting holes for the stage.
2. Mount the stage to the base with M4 socket head cap screws (SHCS).
3. Once half of the mounting screws have been installed, move the stage to the opposite end of travel to
access the remaining screws.
4. Mount the stage to the base using the remaining mounting holes with M4 SHCS.
If the stage is equipped with optional bellows, refer to
Section 4.2.1.
for bellows disassembly instructions.
Carefully slide the tabletop to reveal all
[QTY 8] of the mounting holes.
Figure 2-6:
Access To All Mounting Holes
www.aerotech.com
Chapter 2
11
