IQM 60 V5 Pump Revision October 2010
15
Appendix A
AQM V5.x Software Instructions
Description
The AQM V5.x Software is designed to be a simple interface for communicating with the IQM monitor via a
PC. It can be used to configure the IQM, initiate the zero calibration routine, modify gain factors, poll data
and display the data in either table or graphical format. The software runs in Java VM1.5 (supplied with
software) and the database is an open source HSQLDB Java database. Data can be easily exported to a
spreadsheet for manipulation. The software also incorporates a GSM modem connection which can be
used to connect to and operate an IQM unit remotely.
The software is compatible with IQM firmware versions 4.0 and higher only.
Computer Requirements
•
CD-ROM Drive
•
RS232 port
•
Windows OS version 2000 or later
•
100 Mb of spare hard drive space
•
recommended 256 Mb RAM
•
recommended 1 GHz processor speed
Setting up
1.
Install IQM CD into drive and extract the “Aeroqual AQM V5.x for Vista” or launch the
AQM_4.x.exe software if you have earlier versions of Windows OS.
2. Launch
software
Click Setup
---> COM Port.
Select correct COM port settings
Port, 38400, 8, 1, N, N
Click
OK
Passwords
The factory set passwords for the IQM are:
System password:
password
Diagnostic password:
george
Menu Descriptions
File
Search monitor
Searches for available IQM monitors.
Start Data Logging
Starts data logging from the IQM monitor.
Stop Data Logging
Stops data logging from the IQM monitor.
Export Logged Data
Exports logged data from the IQM monitor.
Import Files
Imports file (aql file).
