![background image](http://html.mh-extra.com/html/aeroqual/aqy-1/aqy-1_user-manual_2862869007.webp)
Page | 7
Modem Installation
If a modem is supplied separately or removed during sensor replacement,
follow the steps below to install it.
❶ Remove the front cover.
❷ Feed one of the supplied cable ties
(connector head facing down) into the lowest
slot of the vertical upright, leave ~ 2 in (50
mm) remaining.
❸ Connect the modem to the AQY 1 using
the USB connection as shown above. Position
the modem against the vertical upright with
the pointed end of the cable tie extending
out on the top side.
❹ Rotate the modem aerial down, bend the
pointed end of the cable tie over the modem
and feed through its connector, pull tight and
trim excess. Rotate the aerial back to the
horizontal. When replacing the front cover
ensure the vent is at the top with the opening
facing down.
Summary of Contents for AQY 1
