5
3.0 Assembly and Installation
Assembly
The following needs to be completed before the Monitor is ready
for use: -
•
Insert the sensor head into the top of the monitor. The sen-
sor head is keyed to ensure the head is inserted correctly.
•
If the monitor is a mains only unit it is ready for use. If the
monitor is to be used as a portable unit with batteries then
the batteries must be installed and charged prior to use.
3.1 Battery Pack
•
Remove the battery cover from
the monitor.
•
Insert the battery power connector
into the monitor power socket in
the back of the monitor.
•
Lay the battery cable into the slot
on
the back of the monitor and insert
the tail end of the battery pack into
the hinge points at the bottom of
the monitor back cover.
•
Clip the top end of the battery pack
into the top clips, taking note to
orientate the battery pack per the
instructions on the battery pack.
•
Replace the battery cover on the
monitor.
