![background image](http://html.mh-extra.com/html/aeroqual/200-series/200-series_user-manual_2862861004.webp)
3
1.0 Monitor Components
Series 200 Monitor
The following components are supplied with the Series 200
Monitor:
•
Series 200 monitor base
•
Gas sensor head
•
12 VDC 800 mA AC/DC adaptor
•
User guide
•
Battery pack – 9.6 V
Please check that all these components have been supplied and
contact your dealer or Aeroqual by email at:
if any of the components are missing.
Replacements
Replacement batteries, sensor heads and other accessories can be
purchased separately.
Note:
All sensors deteriorate over time. It will be necessary to replace your
sensor head with either a new or refurbished head. This must be
done on a scheduled basis or when the “sensor aging” or sensor
failure” diagnostic appears. Bump tests, zero and span calibration
can be performed under specified conditions with appropriate tools.