17
Attach one more Spacer on the outside
of the brace plate and another one on the
inside as shown below, using M3x8mm
Socket Head Cap Screws.
1
X1
X1
...and affix using four M3x8mm Socket
Head Cap Screws as shown in the
picture below.
2
3
X4
X4
X2
EXTENDED LANDING GEAR
Bend the Brace Plate to fit the Landing Gear
Plate slots. Place second Landing Gear
Plate on top...
Firstly attach four of the 50mm Spacers using the
M3x8mm Socket Head Cap Scews as shown here.
X4
X4
X1
4
Repeat steps 1-3 for the second half of your Landing Gear.
Summary of Contents for XM Titanium
