Deployment Guide
53
Management Services Set: hq
1. Click
HiveAP Configuration
>
Management Services
> (Add button).
The New Management Services dialog box appears.
2. On the General page, enter the following:
•
Profile Name:
hq
(You cannot include spaces in the name of a management services profile.)
•
Comment:
Mgt settings for hq HiveAPs
DNS Server Configuration:
•
Domain Name:
apis.com
(This is the domain name of the corporation in this example.)
•
Click
Add
, enter the following, and then click
OK
:
—
IP Address:
10.1.1.25
—
Comment:
HQ Primary DNS Server
•
Click
Add
, enter the following, and then click
OK
:
—
IP Address:
10.1.2.26
—
Comment:
HQ Secondary DNS Server
Syslog Server Configuration:
•
Facility: From the drop-down list, choose a syslog facility with which to tag event log messages from the
HiveAPs. By specifying a particular facility, the syslog server can differentiate all messages from the
same source from messages from other sources.
•
Click
Add
, enter the following, and then click
OK
:
—
Syslog IP Address: (
select
),
10.1.1.23
—
Severity: Choose the minimum severity level for messages that you want to send to the syslog
server. HiveAPs send messages of the level you choose plus messages of all severity levels above it.
For example, if you choose critical, the HiveAP sends the syslog server all messages whose severity
level is critical, alert, or emergency. If you choose emergency, the HiveAPs send only
emergency-level messages.
—
Comment: Type a useful text string, such as "Log critical - emergency events".
3. Click the
SNMP
tab, and then enter the following:
•
SNMP Service Enable: (
select
)
•
SNMP Contact: Type contact information for the person to contact if you need to reach a HiveAP admin.
(You cannot include any spaces in the SNMP contact definition.)
SNMP Server Configuration:
•
Click
Add
, enter the following, and then click
OK
:
—
SNMP IP Address: (
select
),
10.1.1.24
(This is the IP address of the SNMP management system to
which the SNMP agent running on the HiveAPs sends SNMP traps.)
—
Community String: Enter a text string that must accompany queries from the management system.
The community string acts similarly to a password. (HiveAPs only accept queries from management
systems that send the correct community string.)
—
Version: From the drop-down list, select the version of SNMP that is running on the management
system you intend to use:
v1
or
v2c
.
—
Operation: From the drop-down list, choose the type of activity that you want to permit between
the specified SNMP management system and the HiveAPs in the device group to which you (later)
assign this management services profile:
Note:
Spaces are not allowed in text strings you enter in the SNMP Contact and SNMP Location fields.
