For Devices Running HiveManager NG:
1. Power on the AP and allow it to find and connect to HiveManager NG. Once the AP
is connected
it appears in the table of devices on the
Monitor > Devices
page.
2. Select the check box next to the AP, and then choose
Assign Country Code
from the
Actions
drop-
down list. In the dialog box that appears, select the appropriate country from the drop-down list,
and then click
Save
.
3. Upload your changes to the device.
Regulatory Compliance Statements
The regulatory compliance statements in this section apply to AP122 devices.
For Japan, the AP122 is restricted for indoor use in the 5150-5350 MHz band only.
Compliance Statements
The following compliance information applies to the AP122.
R&TTE Directive
This device is compliant with the following directives:
• R&TTE
Directive 1995/5/EC
AP122 Compliance Statement - Europe
EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The
following test methods have been applied in order to prove presumption of conformity with the
essential requirements of the R&TTE Directive 1999/5/EC:
IEC 60950-1:2005 +A1 +A2
Safety of Information Technology Equipment
EN 50385: / Article 3(1)(a) and Article 2 /EC)
Assessment of electronic and electrical equipment related to human exposure restrictions for
electromagnetic fields (0 Hz-300 GHz)
EN 300 328 V1.9.1:
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission
systems; Data transmission equipment operating using wide band modulation techniques;
Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
EN 301 893 V1.8.1:
Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN
covering the essential requirements of article 3.2 of the R&TTE Directive
Page 2 of 14
AP122 Hardware User Guide
11/14/2016
