These devices are intended for indoor use only.
Do not install the device in an environment where the operating ambient
temperature might exceed the recommended ranges.
For products available in the USA/Canada market, for the 2.4 GHz band, only
channels 1-11 can be operated. Selection of other channels is not possible.
Changes or modifications made to this device that are not expressly approved
by the party responsible for compliance could void the user's authority to
operate the equipment.
Use only attachments and accessories specified by Aerohive.
These devices are not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or with lack of experience of
knowledge unless they are given supervision or instruction concerning use of th
devices by a person who is responsible for their safety. Children should be
supervised to ensure that they do not play with the devices.
Electrostatic discharge (ESD) can damage equipment and impair electrical
circuitry. ESD damage occurs when electronic components are improperly
handled and can result in complete or intermittent failures. Be sure to follow ES
prevention procedures when handling electronic components and equipmen
During operation, the surfaces of the AP122 can become hot. Use caution whe
handling.
To meet federal radiation exposure requirements, these devices should be
installed at a minimum distance of 7.8" (20 cm) from people or animals.
Install the AP
You can mount the AP122 on a flat surface or wall, or on the rails of a standard dropped ceiling grid
using the hardware on the back of the chassis.
The following sections describe how to install your AP122 devices and connect them to the network.
Shipping Carton Contents
The AP122 access point shipping carton contains the following items:
• AP122 chassis
• Generic QuickStart Guide
• 3 wall-mount screws with anchors
Page 8 of 14
AP122 Hardware User Guide
11/14/2016
