operating manual B100F / B140F 2019-06-27
6
2. Installation of the turbine
2.1. Attachment options
The attachment points of the bracket to the frame must be
parallel (check before attachment). Otherwise bad tensions
can lead to damage of the engine.
Attach the turbine only with the provided bracket, screws und
bushings.
The ignition plug has to be facing upwards, at twelve o’clock
when seen from the turbine front end.
Should you have deviating wishes concerning turbine
installation,
contact the manufacturer
.
2.2. Engine mounting rules
The engine must be installed
in a way that the area between
ignition plug and cerosin plug
is in the
12 o’clock position
.
(see picture) This is absolutely
vital for a kerosine start of the
B100F / B140F engine. Else,
the start, i.e. the ignition,
would fail and might even lead
to engine damage.
There must not be any combustible objects near the turbine.
The turbine must not be touched by combustible objects.
The nozzle and the whole area within reach of the jet exhaust
must be clear of any objects.
In case of a housed in installment of engine the rear end of the
installation area and any parts which affected by the jet
exhaust should be protected with non-combustible materials
(danger of fire!).
When an extension of the nozzle is
necessary, it must be constructed and installed to the
