Aero EVO-R, Manual

Page: 102 / 155

102
7.7 Cooling coil DX
7.7.1 Functional description of DX coil
Cooling coils can not be integrated inside the unit as they are external accessories. Externally module cooling coils are used for
such purposes as lowering the blowing temperature and dehumidifying the air in the units. It can be driven either proportionally
or by on / off method.
- Cooling coil DX capacities and weights can be seen below.
(Refer to selection software for DX coil’s cooling fluid options)
- The cooling coil capacity values are calculated for the following parameters.
Fluid: R410A
Evaporation temperature:
6°C
Condensation temperature
: 46°C
Super heating: 5°C
Sub cooling: 3°C
Model Cooling capacity (kW) Weight (kg)
EVO-15R 5,9 150
EVO-20R 9,1 165
EVO-30R 11,9 180
EVO-50R 20,1 210
EVO-60R 25 225
EVO-80R 36,8 250
EVO-95R 43,3 265
EVO-120R 62,5 270
EVO-150R 70 290
- DX cooling coil module dimensions can be seen below. (Fig. 94)
A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) K (mm)
EVO-15R 500 350 1000 675 155 100 820 760
EVO-20R 500 350 1000 735 155 100 920 860
EVO-30R 500 350 1000 830 155 100 1030 970
EVO-50R 500 450 1100 935 155 100 1300 1240
EVO-60R 500 450 1100 985 155 100 1420 1360
EVO-80R 500 450 1100 1105 155 100 1670 1610
EVO-95R 500 450 1100 1155 155 100 1770 1710
EVO-120R 500 450 1100 1235 155 100 1920 1860
EVO-150R 500 450 1100 1355 155 100 2170 2110
Fig. 94