© Copyright Aero-Spa®, LLC 2021 REV H
3
Operation and Precautions
IMPORTANT SAFETY INSTRUCTIONS
Proper installation and usage of your Aero-Spa Ozone Generator is your
responsibility. Read and follow this Installation Guide carefully for
important installation, operation and safety information. Basic safety
precautions should always be followed, including but not limited to the
following:
Read and follow all instruction.
Never operate Aero-Spa equipment indoors.
Do not use hot tub for 30 minutes after the Aero-Spa unit has
operated.
Never inhale ozone exhausted by Aero-Spa unit.
Follow all electrical installation instructions in this installation
guide.
Do not operate Aero-Spa unit unless the electrical source is
protected by a Ground Fault Circuit Interrupt (GFCI) device.
Do not use the Aero-Spa unit for applications other than
those described in this installation guide.
Follow all applicable electrical codes.
WARNING - To reduce the risk of electrical shock, do not use
this product if it has a damaged cord. Call Aero-Spa, LLC
immediately to get the product repaired.
Mount the Ozone Generator so that it is inaccessible to anyone
in the hot tub.
Never attempt servicing when wet.
Do not allow children to operate the Aero-Spa.
Plastic ozone supply tubing is supplied with the Ozone
Generator. Never replace this tubing with metal tubing.
Trace amounts of hydrochloric acid may be present in the ozone
tube. Avoid contact with eyes, skin and clothing.
SAVE THESE INSTRUCTIONS.
