© Copyright Aero-Spa®, LLC 2017 P/N102757 rev B
5
Equipment Set-up
For best results it is highly recommended that the pool be
thoroughly cleaned to remove residual dirt and contaminants
prior to installation of the Aero-Pool system.
Set the equipment on a level solid spacer block that is at least 2
– 3/8” thick and at least 10’ from the pool that is not prone to
flooding (equipment is weather proof but not waterproof) Figure
2. If the supplied ozone tube is not of adequate length, move
the equipment closer to the pool but not closer than 10
’. Do not
extend or shorten the ozone tube. If the tube is too long, coil
the excess tube in an
8” diameter coil.
Note: an improperly sized ozone tube will detrimentally affect the
performance and life of this product and may void the warranty!
2 3/8 in.
Minimum
Resting Surface
Spacer
Block
Figure 2: Unit Placement
