9
SELECTING AN OPERATING MODE
If the unit is on, you can press the
MODE
button to pass
from one operating mode to another, in the following
sequence:
AUTO mode
COOL mode
DRY mode
FAN mode
HEAT mode
The various operating modes have different features
and ranges:
• AUTOMATIC mode (AUTO)
: in this mode, the
remote control does not show any set-point value
and the fan speed is set to AUTO.
• COOLING mode (COOL)
: in this mode, the user must
set the working set-point and a fan speed; if the
room temperature is higher than the set value, which
can be seen on the display, the air conditioner will
continue to cool the air until the room temperature
will reach the set-point value.
• DEHUMIDIFICATION mode (DRY)
:in this mode,
the user must set the working set-point but not
the fan speed (which remains fixed at minimum); if
the room temperature is higher than the set value,
which can be seen on the display, the air conditioner
will continue to dehumidify the air until the room
temperature will reach the set-point value.
• HEATING mode (HEAT)
:in this mode, the user must
set the working set-point and a fan speed; if the
room temperature is lower than the set value, which
can be seen on the display, the air conditioner will
continue to heat the air until the room temperature
will reach the set-point value.
• VENTILATION mode (FAN)
:in this mode, the user
must only set the fan speed. This mode provides no
heating or cooling but only uses the internal fan to
ventilate the space.
Operating mode selection
iFEEL
NB:
during operation in FAN mode, the temperatures
shown on the unit display are not implemented.
Summary of Contents for WLRCA10
Page 2: ...2 ...
Page 4: ...4 CERTIFICATIONS COMPANY CERTIFICATIONS SAFETY CERTIFICATIONS ...
Page 19: ...19 ...