AERMEC WLRCA10, User Manual

Page: 15 / 20

15
Setting a programmed
switch-on
iFEEL
SETTING OR CANCELLING A PROGRAMMED SWITCH
ON (TIMER ON)
The units possess a timer used to program switching on
by specifying the time that you want the unit to start.
With the unit off, press the
TIMER
button to access
timer programming mode (in this mode, the ”ON” icon
to the right of the word "timer" on the remote control
display will flash). Press the or button to set the
switch-on time in half-hour gaps (if less than 10 hours)
or 1-hour gaps (if more than 10 hours) (gap from 0.5 to
24 hours).
Press
TIMER
again to confirm the setting and
activate timer programming. If you want to cancel a
programmed switch-on, just press TIMER again and
the words “TIMER ON” will disappear from the remote
control display.
NB:
once the unit has been activated with a timer
program, the operating mode, working set-point
and fan speed will be the same as at the last
switch-off.
Setting a programmed
switch-off
iFEEL
SETTING OR CANCELLING A PROGRAMMED SWITCH
OFF (TIMER OFF)
The units possess a timer used to program switching
off by specifying the time that you want the unit to
deactivate.
With the unit on, press the
TIMER
button to access
timer programming mode (in this mode, the ”OFF” icon
to the right of the word "timer" on the remote control
display will flash). Press the or button to set the
switch-off time in half-hour gaps (if less than 10 hours)
or 1-hour gaps (if more than 10 hours) (gap from 0.5 to
24 hours).
Press
TIMER
again to confirm the setting and
activate timer programming. If you want to cancel a
programmed switch-off, just press
TIMER
again and
the words “TIMER OFF” will disappear from the remote
control display.
NB:
point the remote control towards the unit during
the timer programming process; otherwise, the
timer will probably not be set correctly.