18
NB:
• Remove the batteries if the remote control is
not used for extended periods.
• The remote control can emit a signal up to a
maximum distance of 8 metres.
• The unit can be affected by signals
transmitted by remote controls for
televisions, video recorders, or other devices
used in the same room.
WARNING:
• if the remote control is lost or broken, you can
switch the unit on and off using the button on
the unit control panel.
REPLACING THE REMOTE CONTROL’S BATTERIES
To replace the batteries of the infra red remote control
proceed as follows:
1. Open the battery cover by sliding it in the direction
of the arrow.
2. Remove the old batteries
3. Insert two new high-performance R03 (AAA) 1.5V
alkaline batteries, taking care not to invert the
polarity.
4. Close the battery cover.
Before using the remote control, insert the batteries
and make sure the + and - poles are positioned
correctly.
1
2
3
+
-
-
+
4
NB:
if the remote control does not respond to
commands, or works incorrectly, take the
batteries out for about 30 seconds and then
put them back (making sure they're positioned
properly).
Summary of Contents for WLRCA10
Page 2: ...2 ...
Page 4: ...4 CERTIFICATIONS COMPANY CERTIFICATIONS SAFETY CERTIFICATIONS ...
Page 19: ...19 ...
