manualshive.com logo in svg

AERMEC Omnia HL 11 CM, Technical And Installation Booklet

Share
Download
AERMEC Omnia HL 11 CM Technical And Installation Booklet Download Page 46

46

PROBLEM

Feeble air discharge

It does not heat

It does not cool

The fan does not turn

Condensation on the unit
cabinet.

PROBABLE CAUSE

Wrong speed setting on the control panel

Blocked filter

Obstruction of the air flow (inlet and/or outlet)

Poor hot water supply

Wrong setting on control panel

Poor chilled water supply

Wrong setting on control panel

No current

The water has not reached operating temperature.

The limit conditions of temperature and humidity indica-
ted in the Technical booklets (Operating limits) have
been reached.

REMEDY

Select the speed on the control panel

Clean the filter

Remove the obstruction

Control the boiler

See control panel settings

Control the chiller

See control panel settings

Control the power supply

Please check up the boiler or the chiller.
Check up the thermostat settings.

Increase the water temperature beyond
the minimum limits indicated in the
technical booklet.

For anomalies don’t hesitate, contact the aftersales service immediately.

PROBLEM AND REMEDY

Summary of Contents for Omnia HL 11 CM



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands