AERMEC BHP Series, User Manual

Page: 9 / 44

9
To enter one of the menus available to the user; click
on the corresponding icon; on entering them, each
menu (depending on the one selected) will allow you
to browse the various pages or enter other sub-menus
linked to specific functions.
Press the HOME icon to return to the main page
3.2. Selecting a menu
16:41
2017-05-04 Fri.
Function Parameter View Commission General
4. FUNCTION MENU
4.1. Navigating the menu
This menu is used to set operating functions for the
unit. The following keys are used to navigate this
menu:
• (
1
) Move back to the previous page
• (
2
) Move on to the next page
• (
3
) Go back to the higher level menu
• (
4
) Go back to the main page
• To access a function, click on the text of that
function.
Function (1/4)
Mode: Cool
Fast hot water: Off
Cool + hot water: Hot water
Heat + hot water: Hot water
Quiet mode: Off
3 4
1
2
NOTES:
1. while navigating the menu pages, the current page of the selected menu will be displayed in the
header (i.e. in the darker upper area)
2. any functions not available will be highlighted by the letters “NA”
Mode
Heat Heat + Hot water
Hot water Cool
Cool + hot water
OK Cancel
NOTES:
1. Before changing the operating mode, the unit must be OFF, otherwise a message will warn you to
turn the unit off before changing the mode.
2. If the compatible Aermec accessory tank for this model (refer to the installation manual for more in-
formation) is not installed and correctly set, the only modes available will be HEATING and COOLING.
3. If the relative function is activated (paragraph 8.3), the value of this parameter will be stored in the
memory and automatically reset after any possible voltage failure.
4. The default value for this parameter is: “Heat“.
4.2. Setting the operating mode (Mode)
after accessing the “Mode” function, you can choose
one of the modes available by clicking directly on the
text that identifies it and then confirming with the
”OK” key.