background image

36

General (1/2)

Temp. unit: Celsius

On/Off memory: On

Beeper: Off

Back light: Lighter

Time&Date: Enter

3

4

1

2

8. 

MAIN MENU

8.1. 

Navigating the menu

This menu is used to set the machine adjustment 
values. The following keys are used to navigate this 
menu:

• 

(

1

) Move back to the previous page

• 

(

2

) Move on to the next page

• 

(

3

) Go back to the higher level menu

• 

(

4

) Go back to the main page (Home);

• 

To access a function, click on the text of that 
function.

NB:

 while navigating the menu pages, the current page of the selected menu will be displayed in the 

header (i.e. in the darker upper area).

Click on the "Temp. unit" label to change the unit of 
measurement used for temperature (Celsius or Fahr-
enheit).

General (1/2)

Temp. unit: Celsius

On/Off memory: On

Beeper: Off

Back light: Lighter

Time&Date: Enter

8.2. 

Setting the unit of measurement  (Temp. unit)

General (1/2)

Temp. unit: Celsius

On/Off memory: On

Beeper: Off

Back light: Lighter

Time&Date: Enter

NB:

 if this option is activated, after a power failure the unit will automatically resume the values set and 

saved in the memory.

8.3. 

Activating/deactivating the memory (On/off memory)

Click on the "On/off memory" label to activate or deac-
tivate the saving of parameter/function settings.

Summary of Contents for BHP Series













































Reviews: