5
Aermec code 6755521_01 11.11
ANK 025-085H
Standards complied with
WHEN DESIGNING and
MANUFACTURING the unit:
SAFETY
1. Machinery
Directive
2006/42/CE
2.
Low Voltage Directive
LVD 2006/95/CE
3. Electromagnetic
Compatibility
Directive EMC 2004/108/EC
4.
Directive regarding pressurised
devices
PED 97/23/CE, EN 378,
5. UNI12735,
UNI14276
ELECTRIC PART
1. IEC
EN
60335 2 40,
2. IEC
EN
61000 6 1/2/3/4
ACOUSTIC PART
1. ISO
DIS
9614/2
intensimetric method
PROTECTION RATING
IP24
CERTIFICATIONS
1. EUROVENT
2. EHPA
REFRIGERANT GAS
This unit contains fluoride gases with
greenhouse effect covered by the Kyoto
Protocol. Maintenance and disposal must
only be performed by qualified staff, in
compliance with standards in force.
1.
DESCRIPTION AND CHOICE
OF THE UNIT
The OUTDOOR air-cooled heat pumps in the ANK
range with R410A, have been designed and
manufactured to satisfy the heating/cooling and
production of DHW requirements of small to medium
utilities in residential or commercial buildings.
The units are characterised by extremely silent
operation and are highly efficient and reliable, thanks
to the use of exchangers with a large exchange surface
and low-noise high-efficiency scroll compressors.
The following versions are available:
1.
ANK "H" Wärmepumpe
At the same time, the versions are available with
different set-ups in order to satisfy a wide range of
system solutions:
1. "°"
BASE
2.
"P" PUMP ONLY
3.
"A" STORAGE TANK AND PUMP
2. PRODUCT
IDENTIFICATION
ANK can be identified by:
−
PACKING LABEL, that shows the product
iden
fi
ca on data.
−
TECHNICAL
PLATE
Posi oned on the right lateral side-member
(see TAB.1)
(Tab.1)
TECHNICAL
PLATE
Possibility of D.H.W. production
(DCPX | VMF-DHW |MODU-485A
mandatory)
TE
CHNICAL
SE
CTION
INS
TALLA
TION
SE
CTION
USE