Aeris F11, Operating Manual

Page: 14 / 36

14
F11 OPERATING MANUAL
© 2002 Design, 2013 Doc. No. 12-7285-r01 (5/3/13)
SURFACE MODE
Surface Main is the default screen displayed while in FREE Mode. In addition to Surface Interval Time and Dive Number, a CDT
(Countdown Timer) is displayed (unless it is set Off) which you can start, stop, and reset.
Like Watch mode, you can access a sequence of selections including >>
ALTs (additional data), Countdown Timer, Set Alarms, Set Utilities, Serial Number, and Chronograph.
The CDT is separate from the one featured in Watch Mode.
The Chronograph is the same one as Watch Mode with it's operations carrying over between the two modes.
Button operations >>
• A (< 2 sec) - to step forward through the sequence of selections.
• M (< 2 sec) - to step back through selections.
• M (2 sec, any time) - to revert to Surface Main.
• No button action (2 min) - revert to Surface Main.
• L - to activate the Backlight.
Descent to the DSD (Dive Start Depth) set for 1 second will activate Dive Mode, which will be displayed in the background if the
Chrono is on display. Setting the DSD (for 2, 4, or 6 FT; or 0.6, 1.2, or 1.8 M) is explained later in the Set Utilities section.
Upon ascent to 2 FT (0.6 M) for 1 second, the Dive Main will remain on display until the BDSI (Between Dive Surface Interval) time
set elapses then the Surface Main will be displayed. Setting the BDSI (up to 1 minute) is explained later in the Set Utilities section.
When set On, the SRT (Surface Recovery Time) alarm will sound and flash a message when the Surface Interval after surfacing
reaches the time set. Setting the SRT alarm (up to 30 minutes) is explained later in the Set Alarms section.
When 2 hours elapse after surfacing, operation will revert to Watch Mode. M (2 sec) will access or return from Watch Mode.
SURF MAIN
, information includes (Fig. 21A/B):
> Graphic FREE, or CDT (min:sec) with icons.
> Surface Interval Time (hr:min_sec) with SURF and sec icons.
> Number of the last dive conducted that calendar day with DIVE icon. If no dive has been made yet that day, or if Dive # is
reset by A+S (2 sec), 0 will be displayed.
> Battery icon, if a Low Battery condition.
• A (< 2 sec) to access SURF ALT 1, and step forward through the sequence of selections.
• A (2 sec) to access Log/History.
• A + S (2 sec) to reset Dive # to 0.
• M (< 2 sec) to access Chrono Lead-in, and step back through the group sequence.
• M (2 sec) to access Watch Main.
• S (< 2 sec) to start*/stop CDT. * When the CDT is set for Auto, it will reset and repeat the countdown when it reaches 0:00.
• S (2 sec) to reset the CDT to the time set.
• L (< 2 sec) - to toggle the Backlight On/Off. Will be On for the duration time set.
• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
SURF ALT 1 , information includes (Fig. 22):
> Graphic LAST, indicating data is from the last dive.
> Max Depth with MAX and FT (or M) icons. Dashes if no previous dive conducted.
> Elapsed Dive Time (min:sec) with DIVE and min_sec icons. Dashes if no previous dive conducted.
• A (< 2 sec) - to step forward to ALT 2.
• M (< 2 sec) - to step back to SURF MAIN.
• Reverts to Main in 10 seconds if A or M is not pressed.
• L (< 2 sec) - to toggle the Backlight On/Off. Will be On for the duration time set.
• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
SURF ALT 2
, information includes (Fig. 23):
> Day of Week graphic.
> Time of Day (hr:min_sec) with AM (or PM) icon if 12 Hour Format, no icon if 24 Hour.
> Temperature with °F (or °C).
• A (< 2 sec) - to step forward to CDT.
• M (< 2 sec) - to step back to ALT 1.
• Reverts to Main in 10 seconds if A or M is not pressed.
• L (< 2 sec) - to toggle the Backlight On/Off. Will be On for the duration time set.
• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
Fig. 21A - SURF MAIN
(no dive yet, CDT Off)
Fig. 21B - SURF MAIN
(CDT running)
Fig. 22 - SURF ALT 1
Fig. 23 - SURF ALT 2