15
45°
Fig. XI
45°
23
Fig. XII
Fig. XII
Fig. XIII
18
Staffe di appoggio per
il trasporto in imballo
Fig. IV
trasnport foot
Fig. VII
1
6
4
5
7
6
4
3
3
7
5
15
2
Fig. I
Set di sicurezza (Fig.II)
Fig. V
Fig. VIII
15
8
9
10
11
6
• Remove from the main
body the three transport
feet (15) (Fig.VII), by
unscrewing the bolts,
washers and locknuts
• Fix the main body (15)
to the downrod (6) using
the M12 bolts (8), the flat
washer (9), the spring
washers (10) and locknuts
(11).
22
21
22
21
Fig. X
Fig. XI
16
17
16
17
• Connect the Ø3mm
stabilizing wires with
turnbuckle (16) to the
motor support using
the 5mm snap-hooks
(17) and stabilise the fan;
securely fix the other
end of the stabilizing
wires to the ceiling using
the clamps (18). Fixing
screws for the ceiling/
beam are not supplied.
15
15
Fig. III
Fig. IX
5
5
19
19
Fig.V
Fig. X
19
19
Fig.V
4
• Connect the electric
cable plugs (5) to the
motor through the front
cable grommets (for
this operation follow the
instructions indicated in
the motor manufacturer’s
manual, supplied)
• Let out the safety wire (1)
laterally, hooking the snap-
hooks (4) to the eyebolts
on the motor, verifying the
correct tightening.
