manualshive.com logo in svg

AEQ PHOENIX MERCURY, User Manual, Page: 8 / 54

Share
Download
AEQ PHOENIX MERCURY User Manual Download Page 8

 

AEQ

 

PHOENIX MERCURY

 

 

 

 

8

 

DB15 connector pinout identification 

 

- Pin 1:    

 

- Pin 9: AES_IN- 

- Pin 2: N/A  

 

 

- Pin 10: N/A 

 

- Pin 3: N/A  

 

 

- Pin 11:  

- Pin 4: AES_OUT-  

 

- Pin 12: N/A 

 

- Pin 5: N/A  

 

 

- Pin 13: N/A 

- Pin 6: N/A  

 

 

- Pin 14: N/A 

 

- Pin 7: N/A  

 

 

- Pin 15: N/A 

 

- Pin 8: GND  

 

Considerations: 

 

-

 

The inputs and outputs are compliant with the AES-3 standard, both for audio and for 
synchronization / signalling.  

 

2.2.4. AUX DATA connector (+ IP Reset). 

 
Allows you to connect an external equipment (a PC, for instance) in order to transmit and 
receive auxiliary data in a transparent way. An ancillary data channel at 9600, 19200 or 38400 
bauds is supported that is transmitted over IP, independently of the audio stream. 

 

This same connector can be used to restore the default IP configuration, in case that the unit 
can’t be reached by the software after having been altered. IP configuration is restored by 
turning the unit on while a bridge is present between pins 2 and 3 in this connector. The default 
IP address is 

192.168.1.84.

 

 
2.2.5. Ethernet port (LAN).

 

 
PHOENIX MERCURY is equipped with an Ethernet port. Using this Ethernet port will enable 
you to connect the unit via IP to a LAN or WAN network and send audio over it. This port is also 
used to configure and manage the unit from one or several PCs using the remote control 
software. 

Please consult 

”

AEQ ControlPHOENIX

” 

application manual. 

 

Physically, the connector is RJ45 10/100 BT, with the following pinout. 

 

RJ45 connector pinout 

D

E 

Summary of Contents for PHOENIX MERCURY























































Reviews:

No comments