AEQ
Audio Over IP
Routing System
75
4.9. Using "Dante Controller": Multicast Transmit Flow Configuration.
When clicking on the Multicast Setup button
within Device View (no matter what tag is selected),
a Create Multicast Flow dialog box will appear that
allows the user to aggregate several channels to a
new multicast flow.
This window shows a list of the Tx channels for the device, and allows you to add them to the
new multicast flow that is being created, by checking the tick box next to each channel name.
Once you have selected all the channels required, create the multicast flow by clicking the
"Create" button at the bottom of the dialog box. To abandon creating a new multicast flow, click
"Cancel".
A single multicast flow can contain up to the maximum supported channels per flow for this
device. This is displayed at the top of this window, and is 8 channels for this device. If you
select more than the maximum allowed channels per flow, multiple flows will be created. Once a
flow has been created, it will appear in the list of flows in the transmit pane, along with the
channels contained within that flow. Channels cannot be added to or removed from existing
flows. Each time the dialog is used to select additional channels, a new multicast flow will be
created.
