P
6
/
9
Auto mode works as
a
regular buffer with 1 input and 8 outputs. It has automatic switching to input 2
if in
put 1 stops to receive
the data (signal loss). Automatic switch will occur within approximately 30 seconds after
the signal of input 1 is lost
. Switching
back to input 1 occurs immediately after signal is restored.
Single input transmission with auto swi
tching:
Figure
3: Single input transmission with auto switching
LED (red) operating mode:
Input 1 LED and input 2 LED will blink simultaneously when the data is received and transmitted to the output.
Power LED: Continuous lit when input power is detected.
