Aeon Labs MultiSensor 6
Engineering Specifications and Advanced Functions for Developers
Aeon Labs MultiSensor is a routing binary sensor device based on Z-Wave routing slave library V6.51.06.
MultiSensor can be included and operated in any Z-wave network with other Z-wave certified devices
from other manufacturers and/or other applications. All non-battery operated nodes within the network
will act as repeaters regardless of vendor to increase reliability of the network.
It also supports Security Command Class and has the AES-128 bit security encryption built right in. While
a Security enabled Controller is needed in order to fully use the security feature.
If the MultiSensor is included into a SIS or SUC Z-wave network, it will be associated to SIS or SUC
automatically.
If PIR motion sensor is triggered, the MultiSensor will send a Basic set (0xFF) to associated devices. The
PIR motion sensor will then become inactive. After an interval time (configurable), the PIR motion
sensor will wake up and can detect motion again. The Multisensor will send basic set (0x00) if the PIR
motion sensor is not triggered for the interval time (configurable).
As soon as MultiSensor is removed from a z-wave network it will restore itself into factory settings.
1. Library and Command Classes
1.1 SDK:
6.51.06
1.2 Library
Basic Device Class:
BASIC_TYPE_ROUTING_SLAVE
Generic Device class:
GENERIC_TYPE_ SENSOR_MULTILEVEL
Specific Device Class: SPECIFIC_TYPE_ ROUTING_MULTILEVEL_SENSOR
1.3 Commands Class
Included Non-Secure
Included Secure
Node Info Frame
COMMAND_CLASS_ZWAVEPLUS_INFO V2,
COMMAND_CLASS_VERSION V2,
COMMAND_CLASS_MANUFACTURER_SPECIFIC,
COMMAND_CLASS_ASSOCIATION_GRP_INFO,
COMMAND_CLASS_ASSOCIATION V2,
COMMAND_CLASS_POWERLEVEL V1,
COMMAND_CLASS_NOTIFICATION_V3,
COMMAND_CLASS_WAKE_UP V2,
COMMAND_CLASS_BATTERY V1,
COMMAND_CLASS_SENSOR_BINARY V1,
COMMAND_CLASS_SENSOR_MULTILEVEL_V5,
COMMAND_CLASS_CONFIGURATION V1,
COMMAND_CLASS_SECURITY V1,
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2,,
COMMAND_CLASS_MARK,
COMMAND_CLASS_DEVICE_RESET_LOCALLY,
COMMAND_CLASS_ZWAVEPLUS_INFO V2
COMMAND_CLASS_VERSION V2
COMMAND_CLASS_WAKE_UP V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC V2
COMMAND_CLASS_SECURITY V1
COMMAND_CLASS_DEVICE_RESET_LOCALLY V1
COMMAND_CLASS_MARK V1
