13
OR
Press the button labeled “Remove” on the Aeon Labs Minimote
Stick to begin the Z-Wave removal process.
Note: To remove the Aeon Labs D/W Sensor with other
controllers, please consult the operation manual for these
controllers on how to remove Z-Wave products from an existing
network. For instructions on select partner gateways, visit
www.aeon-labs.com/support.
7.2 Press the security tamper switch located at the back of the
Aeon Labs D/W Sensor to remove it from your Z-Wave
network.
Troubleshooting: If the Aeon Labs D/W Sensor was removed
from the Z-Wave network, pressing the security switch will
illuminate the LED on the front of the Aeon Labs D/W Sensor
solid red for 5 seconds. If the Aeon Labs D/W Sensor was not
successfully removed from the Z-Wave network, the LED will
blink instead of staying solid.
Associate
Learn
Include
Remove
Remove
