10
5. Associating Z-Wave Lights/Switches/
Gateways to the Aeon Labs D/W Sensor
5.1 Press the button labeled “Associate” on the Aeon Labs
Minimote to begin the Z-Wave association process.
5.2 Press the Z-Wave button on the product you wish to be
controlled by the Aeon Labs D/W Sensor when triggered.
Note: To associate a Z-Wave device to the Aeon Labs D/W
Sensor using other controllers, please consult the operation
manual for these controllers on how to associate Z-Wave
products to the Aeon Labs D/W Sensor. For instructions on
select partner gateways, visit www.aeon-labs.com/support.
By associating the Aeon Labs D/W Sensor to Z-Wave devices,
it will be able to report it’s state to gateways, execute scenes
through the associated gateways and turn on/off associated
Z-Wave devices when it is triggered with its magnetic switch.
Note: If your Z-Wave gateway is a SUC/SIS type, there is no
need to follow the association process below to associate the
Aeon Labs D/W Sensor to your gateway. The Aeon Labs
D/W Sensor will do this automatically.
Associate
Learn
Include
Remove
Associate
