Thank you for purchasing the AEMC Micro-Ohmmeter Model 6292.
For best results from your instrument and for your safety, read the enclosed
operating instructions carefully and comply with the precautions for use. These
products must be only used by qualified and trained users.
WARNING, risk of DANGER! The operator must refer to these instructions
whenever this danger symbol appears.
CAUTION! Risk of electric shock. The voltage at the parts marked with this
symbol may be dangerous.
CAUTION! HOT SURFACE! The metallic parts close to this symbol may cause
burn-related injuries.
Application or withdrawal authorized on conductors carrying dangerous voltages.
Type A current sensor as per IEC 61010-2-032.
Must not be applied to or removed from conductors at dangerous voltages. Type
B current sensor as per IEC 61010-2-032.
Equipment is protected by double insulation.
Battery
Important instructions to read and to fully understand.
Useful information or tip to read.
The CE marking guarantees conformity with European directives and with regu-
lations covering EMC.
The trash can with a line through it means that in the European Union, the prod-
uct must undergo selective disposal for the recycling of electric and electronic
material, in compliance with Directive WEEE 2002/96/EC.
Definition of Measurement Categories (CAT)
CAT IV
Measurement category IV corresponds to measurements taken at the
source of low-voltage installations.
Example:
power feeders, counters and protection devices.
CAT III
Measurement category III corresponds to measurements on building
installations.
Example:
distribution panel, circuit-breakers, machines or fixed
industrial devices.
CAT II
Measurement category II corresponds to measurements taken on
circuits directly connected to low-voltage installations.
Example:
power supply to domestic electrical appliances and portable
tools.
