• Test current
is the current to be used when running a test. Available
settings are 50, 100, 150, or 200A. You can also select Manual to use the
rotary knob on the instrument to control the current level during the test.
• Language
specifies the language to be used by the instrument’s display.
• Auto Save
specifies whether or not a test is automatically saved at the time
it is performed.
•
Fan
defines whether the fan is always on or runs in Auto mode (only turns
on when the instrument needs to cool its internal temperature).
• Date format
selects the format of dates to be used by the instrument
(European or USA).
• Time format
specifies whether the time is to be displayed using a 12 hour
(AM/PM) or a 24 hour clock.
On the right side of the Configuration Panel dialog box are five buttons:
• Read from Instrument
resets the options in this dialog box to reflect the
settings as they are set in the instrument.
• Write to Instrument
writes the configuration settings to the instrument.
• Set Clock
displays the Date/Time dialog box. This enables you to set the
instrument’s time to a specific date and time, or synchronize the instrument’s
clock with the PC’s clock.
• Delete Tests
erases the instrument’s memory. Note that after you confirm
that you want to proceed with the deletion; all objects are immediately
removed from memory, irrespective of whether you save any other changes
made through the Configuration Panel dialog box.
• Cancel
closes this dialog box discarding any changes specified without
writing them to the attached instrument.
Downloading Stored Tests
1.
To download stored tests, select
Instrument
from the menu bar, then click
Download
. If a connection had not been previously established, the Connec-
tion dialog box will be displayed. Otherwise, the Select Tests dialog box will
appear displaying a list of tests stored in the instrument.
2.
Select the test you want to download by clicking it. You can select multiple
tests by holding down the
Ctrl
key while clicking your selections. Click
Select
All
to select all listed tests to download. After you have finished making selec
-
tions, click the
Download
button.
3.
To edit the name and other properties of the test, double-click on the test’s
name on the left side of the Control Panel.
4.
Click on the desired test to download (hold the Ctrl key to select multiple
tests), then click the
Download
button.
5.
To edit the name and other properties of the test, double-click on the Test’s
name on the left side of the Control Panel.
NOTE:
For complete operating instructions and more information on using
DataView, refer to the product user manual that is supplied on the USB stick.
