Ground Resistance Tester Model 6471
51
7.2 Recalling Measurements from Memory
To recall saved measurements, perform the following:
•
Select a measurement function, then press the and
MR
buttons.
• Use the ► and ▲▼ buttons to choose the OBJ and TEST numbers.
•
Press the
DISPLAY
button to display the time (tiME) and date (dAtE).
•
Press
DISPLAY
again to display the measurement and its parameters.
•
Press the
MR
button again to exit the recall mode.
The SET-UP function lets you read all memory addresses one after the other
independently of which measurement function is chosen.
Any measurement stored in the tester can be retrieved individually using Data
-
View
®
software (see § 8).
7.3 Erasing Measurements from Memory
There are two ways to erase measurements - complete and selective.
7.3.1 Erasing All Measurements
• Set the switch to SET-UP.
•
Push once on the
MEM
button to display the number of free and available
records.
•
Push a second time on the
MEM
button.
•
The display will show “
dEL ALL
”. Change the blinking
NO
to
YES
with the ▲
button, then perform a long press (>2s) on the
MEM
button.
WARNING:
This will delete ALL saved records.
•
To exit without erasing, perform a short press on the
MEM
button.
7.3.2 Erasing Selective Measurements
• Set the switch to SET-UP.
•
Press the button.
•
Press the
MR
button. The Object and Test numbers of the last stored test ap
-
pear, with the Object number blinking.
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.888.610.7664
