26
Ground Resistance Tester Model 6471
• When the measurement results are acceptable, stop the measurement by
pressing the
START/STOP
button.
•
View the result on the display and toggle through the relevant parameters
using the
DISPLAY
button.
•
To record the information into memory, use the
MEM
button
(see § 7).
4.2 Instrument Configuration (SET-UP mode)
To configure the Model 6471 parameters, turn the rotary switch to
SET-UP
:
•
All the segments on the display are activated for 1 second and then the
“PUSH button” message appears on the display.
•
Various parameters are accessible by pressing the corresponding button.
• The number or symbol which can be modified flashes. These are changed
using the
SELECT button [
►]
and
CHANGE buttons [
▲▼
]
.
•
To exit SET-UP
, turn the rotary switch to another position.
• All of the parameters that are modified are permanently saved until a new
instrument configuration is performed.
Parameter to be modified
Button
Possible values
Date and Month
Hz/OPTIONS
(1
st
press)
yyyy.mm.dd*
Time
Hz/OPTIONS
(2
nd
press)
hh : mm*
Baud Rate
Hz/OPTIONS
(3
rd
press)
9.6k / 19.2k / 38.4k
Default configuration
Hz/OPTIONS
(4
th
press)
yes / no
Distance unit
DISPLAY
(1
st
press)
m (meter) or ft (feet)
Alarm (for m
Ω
and 2-Pole
measurements only)
DISPLAY
(2
nd
press)
ON / OFF
direction (< or >)
value (1 to 999
Ω
)
Buzzer
DISPLAY
(3
rd
press)
ON / OFF
Modbus address
DISPLAY
(4
th
press)
1 to 247
Memory used
MEM
(1
st
press)
000 to 512 (total
number of locations)
Memory location
MR
(1
st
press)
OBJ:TEST
*International format date and time only
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.888.610.7664
