AEMC 6471 User Manual Download Page 12

Page: 12 / 88

Ground Resistance Tester Model 6471

CHAPTER 2

PRODUCT FEATURES

2.1 Description

The Ground Resistance Tester Model 6471 is a portable measurement instrument

designed to measure:

•

Ground Resistance with 2 clamps (no auxiliary rods needed)

• Bond/Connection Resistance (2-Pole and 4-Pole Kelvin sensing)
• Ground Resistance (3-Pole or 4-Pole)
•

Ground Coupling Resistance

•

Selective Ground Resistance

• Soil Resistivity (Wenner or Schlumberger method)

The Model 6471 measures from 0.01 to 99.99k

and is auto-ranging, automatically

seeking out the optimum measurement range, test frequency and test current.

Easy-to-use - Simply connect the leads, select the test mode, press Start and read

the results. Up to 512 test results can be stored in internal memory for later recall

to the display or downloaded to a PC via DataView

software.

The large LCD is easy-to-read and indicates ground electrode resistance, test

voltage, current and frequency as well as individual electrode resistance, battery

status and more.

The Model 6471 is CAT IV rated to 50V and is over voltage protected to more than

250V

against accidental connection to live circuits. The voltage is also displayed

on screen. In the event of a system fault, the Model 6471 can withstand 250V

Additional features of the Model 6471 include a heavy-duty field case sealed

against dust and water when closed (the test button is also sealed against the

elements); manual and automatic test frequency selection from 41 to 513Hz;

4-Pole Soil Resistivity test methods and user selectable 2-Pole or 4-Pole Bond

Resistance test method.

The Model 6471 is powered by 9.6V, 3.5 Ah NiMH rechargeable batteries. An ex

ternal recharger powered from 120/230V, 50/60Hz is included and provides for

testing while recharging.

The Ground Resistance Tester Model 6471 is rugged, easy-to-use and ideal for

maintenance crews performing numerous tests. It exceeds mechanical and safety

specifications for shock, vibration and drop tests per IEC standards. The adjustable

test frequency provides for rejection of high levels of interference, allowing it to be

used under difficult conditions such as high stray currents that affect accuracy.

www.

ShopAEMC

.com

Shop for AEMC products online at:

1.888.610.7664

Summary of Contents for 6471

























































































Search results

Summary of Contents for 6471

Reviews:

Related manuals for 6471

Brands by name

Popular brands

AEMC 6471, User Manual

Search results

Summary of Contents for 6471

Reviews:

Related manuals for 6471

Brands by name

Popular brands