16
Clamp-on Meter Model 514
4.5 Resistance Measurement
• Turn the rotary range switch to the
range.
• Insert the red test lead to the red "
+
" input jack and
the black lead to the black "
COM
" input jack.
• Bring the test probe tips into contact with the sample
under test.
WARNING:
Immediately unclamp the meter
from the conductor under test if overload "
"
is displayed.
WARNING:
When making a resistance mea
-
surement, make sure that the power is off
(dead circuit), and that all capacitors in the
measured circuit are fully discharged.
Summary of Contents for 2117.70
Page 51: ......
