NTX VHF FM Series Remote Mount Trasnceiver
SM28 Installation and Operation Manual
May 9, 2012 Rev: 5.00
Page 3-1
ENG-FORM: 806-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
Section 3.0 Operation
3.1 Introduction
Information in this section consists of the functional and operational procedures for the NTX VHF-FM
Series Remote Mount Transceivers.
3.2 General
The NTX VHF-FM Series Remote Mount Transceivers are mounted using a custom ¼ ATR tray and are
operated using an AEM
Tac/Com™
control head. The NTX138 models are capable of receiving and
transmitting over 138-173.9975 MHz on the VHF high band, and the NTX066 models operate over 66.0 to
88.9975 MHz on the VHF mid- band.
The transceiver is controlled by a Tac/Com™ control head available from
AEM. The relevant control head
operation manual should be consulted for all operational information.
3.3 Configuration
The NTX VHF-FM Series Remote Mount Transceiver has no normal user operational aspects. The
Tac/Com™
control head provides the user interface. During installation, or if the unit has been
exchanged, it may be a requirement to change internal level adjustments. This should be done ONLY
BY FULLY QUALIFIED PERSONNEL, as it requires removal of the
transceiver’s
exterior case and use of
test equipment to measure input and output levels.
End of Section 3.0
