NTX VHF FM Series Remote Mount Transceiver
SM28 Installation and Operation Manual
Installation and Operation Manual
Page ii
ENG-FORM: 820-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
IMPORTANT INFORMATION
FOR AVIONICS INSTALLATION FACILITIES
The NTX VHF-FM Series Remote Mount Transceivers are supplied
without TSO certification, as no such standard presently exists for
airborne VHF-FM radio transceivers. This equipment provides
what is considered as 'supplemental' communications, and can be
installed in an aircraft on a 'Non interference' basis. Installation
should be performed using standard procedures applicable to
aircraft radio installation, to ensure that the newly installed
equipment does not interfere with any other equipment in the
aircraft.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the condition that this device does not cause harmful
interference.
COPYRIGHT STATEMENT
© 2012 Anodyne Electronics Manufacturing Corp. (AEM), All Rights Reserved
This publication is the property of AEM and is protected by Canadian copyright laws.
No part of this document may be reproduced or transmitted in any form or by any
means including electronic, mechanical, photocopying, recording, or otherwise, without
the prior written permission of AEM.
