AEM 30-1100, Installation Instructions Manual

Page: 5 / 8

Connection Diagram for EMS P/N 30-1100
1993-1998 Toyota Supra
PnP The Plug and Play system comes with this configured for proper operation
of this device. Is still available for reassignment by the end user.
Available The function is not currently allocated and is available for use
Dedicated The location is fixed and can not be changed
Pin # 93-98 Supra 2JZGTE AEM P/N 30-1100 Name I/O Availability
1A Switched 12v at key on SWITCHED 12V Input Dedicated
2A Vehicle Speed Sensor Vehicle Speed Input Dedicated
3A Kickdown switch (Not Used) N/U N/U Not used
4A Brake switch input (12V) Not Used N/U N/U Not used
5A NOT USED N/U N/U Not used
6A Malfunction Indicator Lamp (LS10) LS10 Output PNP for Check Engine light
7A Reverse indicator input (ADR13) GEAR Input PNP reverse input (Auto Only)
8A HS1 Output HS1 Output Ava12v switched
9A
2nd gear indicator input (ADR13)
Auto only GEAR Input
PNP 2nd gear indicator (auto
only)
10A
1st gear indicator input (ADR13)
Auto only GEAR Input
PNP 1st gear indicator (auto
only)
11A NOT USED N/U N/U Not used
12A NOT USED N/U N/U Not used
13A NOT USED N/U N/U Not used
14A NOT USED N/U N/U Not used
15A NOT USED N/U N/U Not used
16A
LS7 (USED FOR CLIMATE
CONTROL) LS7 Output PNP for climate control
17A
TT For DATALINK connector(Injector
10i) INJECTOR 10I Output available injector 10
18A
Manual trans mode selector switch
(Switch #5) Swtich #5 Input Manual trans mode (auto only)
19A
TE2 to DATALINK connector
(Injector 9i) INJECTOR 9I Output available injector 9
20A TE1 For DATALINK connector (PW1) PW 1 Output available pw1
21A NOT USED N/U N/U Not used
22A Fuel pump control (Coil 4)) Coil 4 Output PNP fuel pump activation
23A ACMG to A/C Magnetic clutch (LS6) LS6 Output PNP A/C compressor relay
24A
Activates Main Relay with 12V signal
at key on COIL 5 Output Dedicated Main relay
25A
Manual indicator mode light output
(FM) Auto only FM Output
PNP manual mode indicator
(auto only)
26A NOT USED N/U N/U Not used
27A NOT USED N/U N/U Not used
28A Over Drive Switch input (Switch #4) Switch #4 Input PNP Overdrive input (auto only)
29A NOT USED N/U N/U Not used
30A HS2 HS2 Output Ava12v switched
31A Switched 12v from Main Relay Switched Power Input Dedicated
32A NOT USED N/U N/U Not used
33A 12V constant battery 12V CONSTANT Input Dedicated
34A
A/C to a/c amplifier(ADR11 set to pin
# -9 for a/c control) PR Press Input PNP input for a/c request
35A NOT USED N/U N/U Not used
Page 5 of 8