AEM 30-1100, Installation Instructions Manual, Page: 3 / 8

e) Set the throttle range: Select the Configure drop down menu, then ECU Setup | Set Throttle
Range and then follow the direction given on the screen.
f) Verify the ignition timing by selecting the Configure drop down menu, then ECU Setup | Set
Ignition . Use a timing light and compare the physical timing numbers to the Parameter Ignition
Timing displayed. Use the Advance/Retard buttons to make the timing number match.
3)
You are now ready to begin tuning your vehicle.
a) Note: This calibration needs to be properly tuned and is not recommended for street use. NEVER
TUNE YOUR VEHICLE WHILE DRIVING.
Page 3 of 8