8
d. Route the IAT extension harness and secure it with
the two zip ties as shown. Position the female IAT
connector next to the lower intake tube.
e. From underneath the vehicle, plug the female IAT
connector into the IAT sensor in the lower intake tube.
Pull the red lock tab up to secure the connector.
4. AEM
®
IAT Extension Harness Kit Installation
a. Because the stock IAT connectors vary among Dodge vehicles of the same model year, your AEM
®
intake system
includes two IAT extension harness kits. You will only use 1 of the 2 extension harness kits. Use the
appropriate harness to fit your vehicle’s IAT connector.
c. Route the IAT extension harness underneath the
throttle body and towards the driver side of the engine.
b. Select the appropriate IAT extension harness based
on your vehicle’s IAT connector. (Item L or O.)
Connect the male connector to the factory harness as
shown. Pull up on the red tab to lock it.
