8
4. Reassemble Vehicle
5. Service and Maintenance
a.
AEM Induction Systems requires cleaning the intake system’s air filter element
every 100,000 miles. When used in dusty or off-road environments, our filters
will require cleaning more often. We recommend that you visually inspect your
filter once every 25,000 miles to determine if the screen is still visible. When the
screen is no longer visible some place on the filter element, it is time to clean it.
To clean, purchase our Synthetic air filter cleaner, part number 1-1000 and follow
teh easy instructions.
b. Use window cleaner to clean your AEM
®
intake tube.
(NOTE: DO NOT USE
aluminum polish on powder coated AEM intake tubes).
a.
Position the inlet pipes for the best fitment. Be sure that the pipes or any other
components do not contact any part of the vehicle. Tighten the rubber mount, all
bolts, and hose clamps.
b. Check for proper hood clearance. Re-adjust pipes if necessary and re-tighten
them.
c. Inspect the engine bay for any loose tools and check that all fasteners that
were removed are properly tightened.
d. Reconnect the negative battery terminal and start the engine. Let the vehi-
cle idle for 3 minutes. Perform a final inspection before driving the vehicle.
For technical inquiries
e-mail us at
or
call us at
(800) 992-3000
