6
b. Install the two rubber mounts(I)
provided into the previous
mounting location of the stock
aibox as inidicated.
c. Slide coupler(B) over turbo inlet
with two hose clamps(C). Insert
tube(A) into coupler and position
bracket into rubber mount as
shown, leaving clearance between
tube and brake fluid reservoir and
positive battery terminal.
d. Slide provided coupler(B) over
non-stamped end of lower pipe(D)
along with two hose clamps(C).
Slide stamped end of tube down
below driver side headlight housing
and position mounting bracket
into second rubber mount. Slide
coupler evenly between upper
and lower tubes. Ensure proper
clearance between tube and
headlight housing.
e. From the driver’s side wheel well,
install filter(E) onto lower pipe
and secure with provided hose
clamp(F).
3. Installation of AEM
®
Intake System
a. When installing the intake system, do not completely tighten the hose clamps or
mounting hardware until instructed to do so.
